CEN Racing NX76 / NX 7.7 Engine  
-Engine Tuning Guide -  - Engine Parts List-  Buy it Now
NX 7.7 is the first engine of this size designed specially for use in a truck, not a converted helicopter engine. This rear exhaust engine features A.B.C (Aluminum, Brass, and Chrome) construction for longer engine life and higher power output. NX 7.7 comes standard with large "Genesis" red cooling head and 7.5mm, twin needle, sliding carburetor for easy engine tuning. Engine produces 5.0HP at 23,000RPM.

G70373
Rev-line Racing 4.6 ( .28) Engine

Buy it Now
Detail Information - www.rev-line.com
Pull Starter Guide

State-of-the-art technology and design matched with precision components make this 28 engine one of the most desirable nitro motors for the serious competitive racer who doesn't want to spend an arm and a leg. This SG shaft, rear exhaust .28 motor is a top-notch choice for buggy, Truggy and standard monster truck bashers. Unleash the CEN experience as you show the real world what CEN racers pony up with at the track. If you are ready for the thrill of pure power and raw grunt this 28 engine is the choice for you! Featuring precision ball bearings and an easy to tune 2-needle slide carb set-up this motor will fit virtually any 1/8th scale platform. Italian stallions will whimper as the TR28 takes a photo finish 1st place.
Application:  1/8 Buggy, 1/8 Monster Truck, 1/8 Truggy.


G70369
Corsa Racing 5.0 ( .30) Engine

Buy it Now
Detail Information -  www.rev-line.com
Pull Starter Guide

This racing inspired 5.0 cc (.30) Nitro Powered Engine screams into the racing scene at an affordable price. Rev-line Engines' easy to tune two needle carb. system makes it simple to find the ideal settings for your needs. O-rings throughout provide a tight seal to keep dirt and debris out of your motor while preventing air leaks for maximum consistency. Refined porting timing and induction timing enables this motor to provide your race cars with a blast of low-end power and super high RPM that will leave the competition in the dust. Rev-line engineers have selected the world’s finest precision ball bearings to keep your off-road vehicle out there longer then the competition by providing maximum efficiency.
Application:  1/8 Buggy, 1/8 Monster Truck, 1/8 Truggy.


G70362 NX 3.0 / G70356
-Engine Tuning Guide -
-Engine Parts List-
-Pull Starter Guide-
Buy it Now

This 3 port ABC motor is found in all of CEN racings NX series vehicles. A standard threaded crankshaft makes this motor adaptable to most 1/10 scale onroad and offroad vehicles and beyond. This .18 boasts a 3.0 displacement which provides gobs of bottom-end grunt and an RPM power-band that will make you the guy to beat in a drag race! A standard side-exhaust system provides a smooth and drivable power-band which will enable you to put the power to the ground!


G70344 NX-18
G70340 NX-16

-Engine Tuning Guide -
-Engine Parts List-
-Pull Starter Guide-
Buy it Now

Extreme power is the best way to describe the CEN Racing Marine motors. These powerful pull-start nitro motors are extremely reliable out on the open sea with an easy to use two-needle carburetor system that will keep you vessel running strong and smooth. A standard threaded crank shaft makes this aqua motor adaptable to virtually any brand boat out there on the market. A unique water-cooled head keeps this 3 port nitro engine running cool and efficient.


G70349 NX-15
-Engine Tuning Guide -
-Engine Parts List-
-Pull Starter Guide-
Buy it Now

This green headed monster is the notorious powerplant that brought CEN racing’s CT5 RTR to the front of the pack with a blistering 73.4 MPH radar test. Boasting big block power this 2.5 displaced motor will bolt onto any .12-.18 engine mount. Featuring an easy to tune 2-needle slide carburetor with rear exhaust the NX-15 will blow the competition away! The dyno tests don’t lie: 1.5 peak horsepower at 33,000 RPM!!!

If you are looking for high-end performance at a low cost CEN Racing has the nitro motor for you.

ˇ@

ˇ@


G70348 NT-16
-Engine Tuning Guide -
-Engine Parts List-
-Pull Starter Guide-
Buy it Now

The performance and quality that you have come to expect from CEN comes in the affordable and powerful NT-16 designed for the entry level racer that would like to step it up a notch or two! This 3 port side exhaust peaks out at a very impressive 1.2HP at 25,000 RPMs. This particular motor comes with a slide or rotary carb option as this motor will drop right into any 1/10th scale nitro car out there on the market. The pull start system makes this package complete for those guys that just want to have some fun. 

CEN Lifetime motor replacement program will set your mind at ease as this factory tuned motor is ready to plug and play.


G70364 NX-15-L
-Engine Tuning Guide -
-Pull Starter Guide-
Buy it Now

The NX-15L welcomes r/c enthusiasts into the nitro world. This powerful nitro motor fits most RTR 1/10th vehicles. A 2-needle slide carb makes it east to start to learn why the latest craze revolves around nitro. This ABC motor comes sporting a cast aluminum block that will scream up and down the track with the big boys. A reliable pull-start system takes away the frustration of trying to line your chassis up on your friends bump box. The NX-15L is our team drivers top choice when it comes to racing the all new MG-16 and MG-10 models.

 (discontinued)

G70354 Turbo 2.5

-Engine Tuning Guide -
Engine Parts List-


G70360 NX26
-Engine Tuning Guide -
Engine Parts List-

All 1/10 On-road and Off-road vehicle. 

This two chamber pipe was designed by our National Champion race team to provide CEN enthusiasts with the maximum delivery of power from bottom-end grunt all the way up to top speed. The G70352 race pipe will dazzle your friends with its crisp delivery of power that will lay a stream of nitro smoke between you and the competition. The 2 chamber tuned pipe will also spruce up your ride with a variety of optional colors: available in Silver, Black (G70352B) and Copper (G70352C). All pipes include required mounting hardware.  $42
Buy it Now

Blistering the big block realm of tune pipes, CEN Racing proudly offers up this one-of-a-kind 4 chamber missile. This pipe is available in silver and offers enthusiasts the type of bottom-end power you have come to expect from CEN Racings monster truck line. Additional cooling fins have been implemented into this pipes design to insure efficiency on demand. Lay down a big puff of smoke when you rip into a throttle of the pipe that gave the GST 7.7 that distinct sound
Buy it Now

The Marine Exhaust pipe will enable the aqua r/c enthusiast to unleash the fury within the hull of that nitro powered beast. This easy to mount pipe allows for maximum flow of your models exhaust providing more raw power and a nice crisp sound that will distinguish your boat as not a toy.
Buy it Now

Are you ready to blow away the competition? CEN Racing’s lightweight composite pipe is the way to go! This mid-range tuned pipe features a 2 chamber design with a dual exhaust stem. An integrated fuel pressure line nipple takes away the hassle of possible leaky nipples which can rob your engine of power and create unwanted heat. Once you go black you never go back.  This pipe also features a CEN Racing logo so your competition knows who smoked  Buy it Now

Are you tired of torn exhaust seals in your fancy one-piece tuned pipes? CEN Racing has the solution for you with this silver polished big block tuned pipe designed for .21-.46 nitro powered motors. This pipe is the choice of our top racers running the RTR Matrix buggy and truggy. Key features include a coupler mounting design with pre welded nipple in this All Range tuned pipe- Exhaust Header sold separately.
Buy it Now


G70319
Color: Silver
Class: .12 - .18
Chamber: 2
Power Range: Bottom - Mid Range
$31.50

 (discontinued)

G70320
Color: Silver
Class: .12 - .18
Chamber: 2
Power Range: Bottom - Mid Range
$31.50

 (discontinued)

G70321
Color: Silver
Class: Big Block .21 - .28
Chamber: 3
Power Range: Bottom - Mid Range
$35.00

 (discontinued)

G70334
Silicon Exhaust Tip
Color: Pink, Yellow, and Green
Class: All
$3.99

Buy it Now

Take a look as CEN Racing offers a complete line up of nitro headers for all of your r/c needs. We provide the needed hardware and gaskets with these items to make it easy for you to get back out on the road. Featuring small and big block headers CEN Racings exhaust components offered in both standard and rear exhaust configurations.

CEN Racing knows how important it is to keep you engine breathing clean fresh air. Our R&D team has specially designed these filters to protect the most expensive motors out on the market today. Go with a name you can trust. CEN offers a variety of air filter styles that will fit any r/c hobbyists needs from the noobs all the way up to the pro guys standing on the podium. Filter out what you don’t need- Go with CEN premium air filters.


G70333
Flexible Manifold
Color: Silver
Class: .12 - .18
$36.00

Buy it Now

G70351
Color: Silver, Black, and Copper
Class: .12 - Big Block .15
$33.00

Buy it Now

G70351
Color: Silver, Black, and Copper
Class: .12 - Big Block .15
$33.00

Buy it Now

G70351
Color: Silver, Black, and Copper
Class: .12 - Big Block .15
$33.00

Buy it Now

G70336
Color: Black
Class: .12 - .18
$18.00
Fits HPI RS4, OFNA

Buy it Now

G70322
Color: Silver
Class: .12 - .18
$12.00
Fits T-Maxx, Terra Crasher

Buy it Now

G70323
Color: Silver
Class: .12
$12.00

Buy it Now

G70324
Color: Black
Class: Big Block .15
$18.00

Buy it Now

G70325
Color: Silver
Class: .21
$23.00

Buy it Now

MX057
Color: Silver
Class: .21 - .28 (1/8 Buggy)

Buy it Now

G70335
Colored Air Filter Tube
Color: Green, Pink, and Yellow
Class: .12 - .18
$6.00
  Buy it Now

G70314
Color: Black
Class: .12 - .18
$7.00
2 foam filter included

Buy it Now

G70331
Color: Purple
Class: .12 - .18
$7.00
2 foam filter included
  Buy it Now

GS022
Color: Black
Class: .21 class and up
$16.00
3 foam filter included
  Buy it Now

MX210
Air Filter
Class: .21 class and up

Buy it Now
ˇ@